AC Tech SMVector Drive
(back To AC Tech Index)
|
|
NEW! AC Tech SMVector Drive
The SMVector is our most technically advanced inverter drive continues AC Tech's tradition of innovative compact inverter design. The performance and flexibility make the SMVector an attractive solution for a broad range of AC Motor applications including:
-Food Processing machinery
-Packaging machinery
-Material handling systems
-Conveying Systems
-HVAC systems
The SMVector Series can be used with 3-phase AC induction motors rated from 1/3 HP up to 25HP (0.25 - 18.5 kW) on voltages from 120V single-phase to 600 V three-phase. NEMA Type 1 (IP31), Type 12 (IP54) and type 4X (IP65) industrial enclosures allow mounting the drive close to the motor and the equipment operator.
Programmable digital and analog I/O allow the drive to be configured for many application specific tasks such as multiple preset speeds, electronic braking and motor jogging to name a few. Like all AC Tech sub-micro drives, the SMVector uses EPM memory technology for fast and efficient programming.
NEMA type 1 (IP 21) Enclosures
.33 to 25 HP (0.25 to 18.5 kW)
Input voltages from 120 VAC (1Ø) to 600 VAC (3Ø) Technical Brochure in PDF format
|
|
The SMVector Series - AC Tech's innovative NEW inverter drive.
With its price, its flexibility and a power range of up to 20 Hp, the SMVector drive excels in environments where inverter technology was once considered too costly, including packaging machinery, food processing machinery, material handling/conveying systems and HVAC systems.
The SMVector carries all the features required by demanding applications including four modes of operation (V/Hz, Enhanced V/Hz, Vector Speed, and Torque), high starting torque, auto-tuning, advanced low-speed control, and dynamic speed regulation.
|
 A Global Drive
Ratings:
120/240V, 1ph: .33 to 1HP (0.25 to 0.75kW)
200/240V, 1 or 3ph: .33 to 3HP (0.25 to 2.2kW)
200/240V, 3ph: 1.5 to 20HP (1.15 to 15kW)
400/480V, 3ph: 0.5 to 25HP (0.37 to 18.5kW)
480/600V, 3ph: 1 to 25HP (0.75 to 18.5kW)
Standards:
UL (USA)
CUL (Canada)
CE (Europe)
GOST (Russia/Ukraine)
C-Tick (Australia/New Zeland)
Envionmental Protection:
NEMA 1
IP21
-10 to 55°C
2.5% derate per °C above 40°C
Comprehensive Diagnostic Tools
Real Time Monitoring:
8 register fault history
Software Version
Drive Network ID
DC Bus Voltage (V)
Motor Voltage (V)
Output Current (%)
Motor Current (A)
Motor Torque (%)
Power (kW)
Energy Consumption (kWh)
Heatsink Temperature (°C
0-10 VDC Input (User Defined)
4-20 mA Input (User Defined)
PID Feedback (User Defined)
Analog Output (% Load, % Torque, kW)
Network Speed (baud rate)
Terminal Continuity
Keypad Status
Elapsed Run Time (hours)
Elapsed Power on Time (hours)
Easy to Use Keypad & Display
6-Button Interface:
Start
Stop
Forward/Reverse
Scroll Up
Scroll Down
Enter/Mode
Vivid Illumination:
4 digit LED display
Easy to read from a distance
Movable Decimal Point
|
World Class Control
Modes of Operation:
Open Loop Flux Vector (Speed or Torque)
V/Hz (constant or variable)
Enhanced V/Hz with Auto-tuning
Acceleration/Deceleration Profiles:
Two Independent Accel Ramps
Two Independent Decel Ramps
Linear or S-Type
Auxilary Ramp-to-Stop
Output Frequency:
500 Hz Std.
1000 Hz Optional
Selectable Logic Assertion:
Positive Logic Input (PNP current sourcing)
Negative Logic Input (NPN current sinking)
Braking Functions:
DC Injection Braking
Optional Regenerative Braking
Speed Commands:
Keypad
Jog
Floating Point Control
Voltage: Scalable 0-10 VDC
Current: Scalable 4-20 mA
Potentiometer
8 Preset Speeds
Process Control:
PID Modes: Direct or Reverse Acting
PID Sleep Mode
Vigilant System Protection
Voltage Monitoring:
Low DC Bus Voltage Protection
High DC Bus Voltage Protection
Low Line Voltage Compensation
Current Monitoring:
Motor Overload Protection
Current Limiting Safeguard
Phase Loss Protection
Ground Fault
Short Circuit Protection
Loss of Follower Management:
Protective Fault
Go to Preset Speed
Initiate System Notification
Overtemperature Protection
|
|
Electronic Programming Module (EPM)
Program the SMVector quickly and easily using the electronic programming module (EPM). The EPM stores the drive’s
parameter configuration and simplifies initial setup:
„ Three ways to program the EPM
- Use the intuitive SMVector integrated keypad
- Program in a Microsoft WindowsTM environment with Techlink
- Or with the lightweight portable EPM programmer. The crystal clear 16-character LCD display
makes programming multiple drives a snap.
„ The EPM saves time and money. It’s as easy as 1, 2, 3…
1. Create your parameter profile and archive to the EPM programmer, a master EPM or your PC.
2. Insert the EPM into the programmer and copy parameters in a matter of seconds!
3. Plug the EPM into the drive and it is fully programmed and ready to go.
Imagine programming 20 drives in less than one minute.
„ Improve efficiency. Program the drive anytime and anywhere it makes sense during your manufacturing
or commissioning process. You can even plug in a fully programmed EPM before connecting the drive to
power. Now the drive is ready and waiting for power to be connected.
„ Safeguard your configuration. When you program the EPM your parameter settings are automatically
archived. This truly unique feature allows the SMVector to be reset to factory default settings or to
customer settings.
The EPM. Another example of the innovative thinking that separates Lenze-AC Tech from its competition.
|
|
|
